Offriamo la più ampia gamma di lastre termoplastiche attualmente disponibile in Europa.

A HDPE sheet filled with a high quality mineral fillers, for improved rigidity, high heat stability and thermoformability. This product offers excellent impact properties at very low temperatures, has good chemical resistance, with very good stiffness. 10% mineral filler

A High Density Polyethylene (HDPE) sheet with excellent impact properties at very low temperatures, and very good chemical resistance and stiffness. Particularly resistant to stress whitening when bent. This version has further improved flow characteristics compared to 2102 version for extreme thermoforming properties.

A High Density Polyethylene (HDPE) sheet with excellent impact properties at very low temperatures, and very good chemical resistance and stiffness. Particularly resistant to stress whitening when bent.

A HDPE, modified with antislip properties for good abrasion resistance. This material offers excellent impact strength at very low temperatures, offers very good chemical resistance and is easy to thermoform and fabricate.

A HDPE offering the traditional characteristics of a quality material including excellent impact performance at low temperatures, good chemical resistance, and very good stiffness. This material has been modified with a high molecular weight, which significantly improves mechanical strength and abrasion resistance.

A Polyethylene sheet manufactured from post-industrial recyclates that offers an economic alternative to virgin HDPE, where colour and physical properties are not critical.

A Polypropylene Copolymer (PPC) sheet that has excellent physical characteristics, particularly for applications where impact strength and heat resistance is important. Its chemical resistance is excellent. This product comes on rolls and has an excellent fltaness and low gauges tolerances. It can easily be thermoformed or fabricated.

A modified copolymer Polypropylene (PPC) filled with a high quality mineral for greater rigidity and improved thermoforming characteristics than our standard range of PPC materials. 20% mineral filler

A Polypropylene Homopolymer (PPH) sheet which has excellent physical characteristics, particularly for applications where stiffness and high heat resistance is important. Compared to the Polypropylene Block Copolymer (ViSpec PPC 3100) it is stiffer and has higher heat resistance.

A Polypropylene sheet manufactured from post-industrial recyclates that offers an economic alternative to virgin PP, where colour and physical properties are not critical.

A tough and high chemical resistant Polyolefine for underground protection of technical pipes.

An opaque High Impact Polystyrene (HIPS) sheet that offers a good balance of stiffness and toughness. It has very good impact strength and is an ideal for general-purpose applications. It is very easy to thermoform and fabricate.

An opaque High Impact Polystyrene (HIPS) thin film that offers a good balance of stiffness and toughness. It is produced by blow film line using a ULV0 certified resin.

An HIPS sheet designed for electronic device packaging and handling trays where low surface resistivity requirements are critical. This material offers permanent dissipative properties that are not moisture dependent.

A High Impact Polystyrene (HIPS) material designed for packaging electronic devices and handling trays that are very sensitive to Electro Static Discharge (ESD). It has permanent conductive properties, without the dependence of a humid atmosphere. It is available in two ranges of volumes resistivity.

A High Impact Polystyrene (HIPS) with a good balance of stiffness and toughness, laminated with a metallic film to give a mirror effect finish, ideal for the POS and luxury markets.

An opaque HIPS that has improved low temperature impact strength and resistance to Freon expander making this material ideal for the refrigeration and sanitary markets.

A Polystyrene sheet manufactured from post-industrial recyclates that offers an economic alternative to virgin PS, where colour and physical properties are not critical.

A High Impact Polystyrene (HIPS) with good impact strength and the right balance of stiffness and toughness. This material meets German regulation DIN 4102, classification B1.

A HIPS sheet with a good balance of stiffness and toughness, laminated with a metallic film to give a mirror effect finish, ideal for the POS and luxury markets. This version uses a flame retardant HIPS based sheet and is certified DIN 4102-B1.

A blend of HIPS and Polyethylene (PE), that has been modified to offer excellent stiffness and excellent thermoforming properties. This material also has excellent chemical resistance and low temperature impact properties of PE but with the easy thermoforming properties of HIPS and could be a good alternative to ABS. - Rolls as well as sheets are available from our Esbjerg manufacturing facility.

A blend of HIPS and Polyethylene (PE), that has been modified to offer excellent stiffness and excellent thermoforming properties. This material also has excellent chemical resistance and low temperature impact properties of PE but with the easy thermoforming properties of HIPS and could be a good alternative to ABS.

An alloy PS/PE produced with selected regrind raw material for thermoforming. This product is a good alternative at recycled ABS, it is available in a colour between a dark grey to black. The presence of PE improves the impact resistance and chemical resistance. HIPS provides stiffness and thermoformability.

A high matt version of the 6100, this high impact ABS sheet is very easy to thermoform and suits most application.

A high heat resistant ABS sheet, particularly suited for those demanding applications. It is also has particularly high rigidity.

Superior impact strength ABS, particularly suited for low temperature applications, deep thermoforming or whenever a high resistance to shock is required.

Standard impact ABS with “low noise” properties showing a very good grain retention after thermoforming.

MATT soft touch Polyurethane (PU) coextruded on top of ABS showing a very good grain retention after thermoforming. TPU gives a pleasant touch, anti-slip properties and improved chemical resistance.

A soft capped ABS sheet, which gives a nice soft feel properties with excellent weather resistance and recyclability while avoiding the grip effect of traditional TPE layer.

A tough and rigid ABS sheet covered with a laminated patterned foil surface. Suitable for outdoor use with scratch resistance and UV resistance grades available.

ViSpec Chrome 6195 is our ABS with laminated mirror film. It has excellent physical characteristics, particularly for applications where high rigidity and good impact strength are required. Thanks to its excellent weathering resistance it can also be used for outdoor applications. It also has good thermoform ability.

Flame Resistant ABS with very good durability, a high degree of rigidity and heat resistance. It is suited for both vacuum and pressing forming.

An ABS sheet with very good toughness and with a high degree of rigidity, and heat resistance. It is suited for both vacuum and pressing forming.The base is recyclate, capped with Polyurethane (PU) that offers a non-abrasive surface. Used extensively in the handling tray market.

A flame resistant grade that meets V0 at 2 mm NF 92501 M3 fire certification. VitasheetGroup"s Flame Resistant ABS (Acrylonitrile Butadiene Styrene) has very good toughness with a high degree of rigidity, and heat resistance.

A mono layered ASA material, offering the best weathering resistance. ASA shares many characteristics with ABS : tough, easy to process, good chemical resistance. It also has the extra benefit of extended weathering performance giving long service to exposed environments.

A high impact ABS sheet capped with a ASA layer. This combination offers the outdoor resistance of ASA, with the superior impact resistance and rigidity of ABS. It gives the benefit of extended weathering performance giving long service to exposed environments.

A recycled ABS sheet capped with a ASA layer. This combination offers the outdoor resistance of ASA, with the superior impact resistance and rigidity of ABS. It gives the benefit of extended weathering performance giving long service to exposed environments.

A Medium heat ABS sheet capped with a ASA layer. This combination offers the outdoor resistance of ASA, with the superior impact resistance and rigidity of ABS. It gives the benefit of extended weathering performance giving long service to exposed environments.

Acrylic capped ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

Matt Acrylic capped medium impact ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

Acrylic capped standard impact ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

impact modified PMMA layer coextruded on the top of a medium impact ABS substrate. It meets the most demanding requirements for class A body panels finish.

Impact modified PMMA layer coextruded on the top of a standard impact ABS substrate. It meets the most demanding requirements for class A body panels finish.

A hard-wearing acrylic capped ABS with excellent surface aspect and high scratch resistance and impact properties.

Acrylic capped High impact ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of caravan industries. ASA back layer offers double layer UV resistance together with an improved chemical resistance.

Acrylic capped High impact ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of caravan industries.

Acrylic capped High Heat ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of caravan industries.

Improved chemical resistant Acrylic capped recycled ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

A Polycarbonate (PC) material with good mechanical features (impact resistance) in high temperature and ideally suited for thermoforming.

A recycled Polycarbonate (PC) material specially selected for handling application in thermoforming with high temperature resistance requirement.

PE based flexible sheets designed for the protection of vehicles interiors. This version has an anti-slip layer to avoid unwanted moves of the goods being transported.

PP based flexible sheets designed for the protection of vehicles interiors. This version has an anti-slip layer to avoid unwanted moves of the goods being transported.

A blended ABS/PC material (combining Acrylonitrile Butadiene Styrene and Polycarbonate) that has been modified with a flame retardant grade of ABS/PC and has NF 92501 M1 and NF 16101 F2 Certification. This material has the easy processing properties of an ABS but with the heat resistance and mechanical properties of Polycarbonate.

A blended ABS/PC material (Acrylonitrile Butadiene Styrene and Polycarbonate) which is easily processed with similar processing properties of ABS but with the high heat resistance and excellent mechanical properties of Polycarbonate. It has excellent rigidity, which allows for some reduction of its thickness compared to ABS and is suited for both vacuum and pressing forming.

An ABS/PC blended material (Acrylonitrile Butadiene Styrene and Polycarbonate) with a coextrusion of PMMA on the top.

A High heat Polyphenyloxide (PPO) that has been modified with Polystyrene for easier processing. This material has a good combination of tensile strength, rigidity and toughness, and offers good chemical resistance and high heat working temperature (110-130oC).

A Polypropylene Copolymer (PPC) sheet with a PE foam (soft touch) on one side particularly suited for applications in protective body care where impact protection is important. This PPC has excellent physical characteristics and a good thermoformability. Its chemical resistance is excellent.

Acrylic capped ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

Matt Acrylic capped super high impact ABS offering excellent weathering properties with high UV and scratch resistance, ideal for meeting the demands of exposure to the elements of the outdoors.

An alloy PS/PE produced with selected regrind raw material for thermoforming. This product is a good alternative at recycled ABS, it is available in a colour between a dark grey to black. The presence of PE improves the impact resistance and chemical resistance. HIPS provides stiffness and thermoformability.